The maintenance and care of fiber laser cutting machines are related to the service life, cutting quality and production efficiency of the equipment. The following are some common maintenance and care measures:

Clean the laser head regularly

The laser head is prone to accumulate dust and metal smoke and needs to be cleaned regularly. Keep the lens and focusing mirror clean to ensure that the transmission of the laser beam is not affected.

Check the laser cooling system

The CNC laser cutting machine generates a lot of heat when working, and the cooling system must function properly. Check the water level and temperature of the coolant regularly to ensure that the cooling system is clean and avoid clogging of the water pump and filter.

Check the optical system

Regularly check the alignment of the optical fiber, lens and laser head to ensure that the optical path is not deviated. If the optical fiber is damaged or the lens is scratched, replace it in time.

Check the electrical system

Regularly check the electrical wiring, especially the high-voltage part, to ensure that there is no looseness, aging or damage. Check and maintain the power supply and electronic control system to reduce the occurrence of faults.

Clean and lubricate moving parts

The moving parts of the laser metal cutting machine, such as guide rails, rollers, etc., should be cleaned and oiled regularly to keep the movement smooth and reduce friction loss.

Replace the air filter regularly

The compressed air used by the laser cutting machine needs to be purified through the filter. The filter should be replaced regularly to ensure clean air and avoid contaminating the cutting surface or affecting the cutting quality.

Check and adjust cutting parameters

According to the type and thickness of the material, adjust the power, speed and other parameters of the laser cutting machine in time to ensure the best cutting effect.

Software update and backup

Update the operating system and cutting machine control software regularly to ensure system security and functional improvement, and do a good job of data backup.

Check laser power regularly

The power of the metal plate laser cutting machine may decrease over time. Check the laser power regularly and adjust it to maintain efficient cutting results.

Operator training

Ensure that the operator is familiar with the equipment's use and maintenance manual, and conduct technical training regularly to reduce failures caused by improper operation.